产品展示
SCZ50-4D伸缩臂吊装机
【简单介绍】
【详细说明】
SCZ50-2D伸缩臂吊装机
(escopic Crane Loader)
[ 产品简介 Product Introduction ]
SCZ50-2D型伸缩臂吊装机,底盘采用前轮驱动,后轮转向,刚性悬挂;传动采用前后各两档液力机械传动变速箱,全液压动力转向,制动为气推油钳盘式制动;工作装置为两节四边形伸缩臂和一个可旋转吊臂组成。该机于进集装箱石板材的吊装作业,也可作为一般吊车使用,可广泛适用于工厂、码头、货场、林场、建材、仓库、物流等行业,是一种适应性广和效率高的装卸机械。
The SCZ50-2D escopic Crane Loader works with front-wheel drive, rear-wheel steering, rigid suspension; adopt total four hydromechanical drive gear-boxes in the back and front as the transmission, hydraulic power steering, caliper disc brake; the working device is composed of two quadrilateral portable escopic arms and a rotary boom. It is specially used for lift on/off the stone slab container and it can also be used as a normal crane. It is widely available for the factory, dock, goods yard, forestry center, building materials industry, warehouse, logistics and so on. It is a handling machinery of wide application and high efficiency.
[ 主要技术参数 Specifications ]
额定起重量 Rated Load | 5000kg | |
载荷中心距(轮胎前沿距载荷中心) The Distance of Load Center(Tyre-fore to load center) | 3000mm | |
主钩zui大起升高度(主吊钩距地面) Max.Lifting Height of Main Hook(Main hook to ground) | 6250mm | |
主钩zui大外伸距(水平)(轮胎前沿距主吊钩) Max.Outspread of Main Hook(Horizontal)(Tyre-fore to main hook) | 2750mm | |
zui大行驶速度 Max.Traveling Speed | 25km/h | |
zui小离地间隙 Min.Ground Clearance | 365mm | |
zui小转弯半径 Min.turning Radius | 6800mm | |
爬坡度 Grade Ability | ≥20% | |
倾翻角度上/下 The Angle of Lean Up/Down | 24°/22.5° | |
轮距 Tread | 1825mm | |
轴距 Wheel base | 2998mm | |
自重 Deadweight | 13000kg | |
整机外形尺寸(长×宽×高) Overall Dimension (L×W×H) | 5400mm×2200mm×2800mm | |
发动机(一拖东方红) Engine (Yituo Dongfanghong) | 型号 Type | LR4108G76 |
额定功率 Rated power | 74kw | |
标定转速 Rated speed | 2400r/min | |
排量 Exhaust | 4.6L | |
轮胎 Tyre | 前轮 Front wheel | 15.5-25(16PR) |
后轮 Rear wheel | 11.00-20(16PR) |
注:由于技术改进,该数据可能与产品不符,如有误则以产品为准。
Note:The content and performance will be revised and the products will be improve without notice.