恒压调节阀系列 Constant pressure regulating valve
应用气动控制压力及流量。
标准设计 恒压阀阀体12个厚钢板锻压设计工艺、阀芯及所有零部件采用AISI3016L或304制造，阀体内外喷砂抛光，膜片采用优质橡胶制成，温可达到140℃
工作原理CPM-2恒压调节阀由控制压缩空气的压力大小来控制调节阀芯的位置，从而达到所需的压力及流量
技术参数 生产压力: 1000KPa(10bar)最小生产压力: 0KPa(0bar)=大气
温度范围:-10℃to至+95℃ 温度范围(上隔膜PTFE/EPDM):-10℃to至+140℃(按要求更高)。
空气压力: 0 to 600kpa (0 to 6bar) 流量范围Kv,全开(p=1bar): 大约23㎥/h.
流量范围Kv,低能力(p=6bar): 大约2㎥/h. 可选择的尺寸): 调节区域大约152㎥/h.(CIP区域)
Constant pressure regulating valve
Applications Pneumatic control pressure and flow.
Standard design Constantpressure valve body 12 of thick steel forgingdesignprocess, the spool and all parts manufactured by AlSl3016L or 304,sandblastingpolishing inside and outside the body, the diaphragm is made of high quality
rubber,the maximum temperature can reach 140℃
Working principlCPM-2constant pressure regulating valve controlled bythecompressed air pressure regulating valve to controlthe size ofthe position, so as to achieve the requiredpressure andflow
Technical parameters Largestproducer of pressure: 1000KPa (10bar)
Minimumproduction pressure: 0KPa (0bar) =atmospheric
Temperaturerange:-10℃to +95℃ to
Temperaturerange (on the diaphragm PTFE /EPDM):-10℃toto + 140℃(higher on request).
Airpressure: 0 to 600kpa (0 to 6bar)
Flowrange Kv, fully open (p= 1bar): about 23㎥/h.
Flowrange Kv, low capacity (p= 6bar): about 2㎥/h.
Optionalsizes): regulation of regional about 152㎥/h.(CIParea)
恒压阀.pdf
