行业产品

  • 行业产品

厦门圣企机电设备有限公司


当前位置:厦门圣企机电设备有限公司>>美国GE模块>>模块>>美国GE模块IC756WDV009K-22

美国GE模块IC756WDV009K-22

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌

厂商性质经销商

所  在  地厦门市

更新时间:2021-09-06 16:06:00浏览次数:207次

联系我时,请告知来自 物流技术网

经营模式:经销商

商铺产品:200条

所在地区:福建厦门市

联系人:黄荣生 (经理)

产品简介

美国GE模块IC756WDV009K-22高速发展的计算机技术带领人类进入了信息社会,同时也促进了电源模块技术的迅速发展。八十年代,计算机全面采用了开关

电源,完成计算机电源换代。接着开关电源技术相继进入了电子、电气设备领域。



计算机技术的发展,提出绿色电脑和绿色电源模块。绿色电脑泛指对环境无害的个人电脑和相关产品,绿色电源系指与绿色电

脑相关的高效省电电源,根据美国环境保护署l992

详细介绍


美国GE模块IC756WDV009K-22


美国GE模块IC756WDV009K-22


绿色电源模块


高速发展的计算机技术带领人类进入了信息社会,同时也促进了电源模块技术的迅速发展。八十年代,计算机全面采用了开关

电源,完成计算机电源换代。接着开关电源技术相继进入了电子、电气设备领域。


计算机技术的发展,提出绿色电脑和绿色电源模块。绿色电脑泛指对环境无害的个人电脑和相关产品,绿色电源系指与绿色电

脑相关的高效省电电源,根据美国环境保护署l992年6月17日“能源之星"计划规定,桌上型个人电脑或相关的外围设备,在

睡眠状态下的耗电量若小于30瓦,就符合绿色电脑的要求,提高电源效率是降低电源消耗的根本途径。就目 前效率为75%的

200瓦开关电源而言,电源自身要消耗50瓦的能源。


开关电源模块


通信业的迅速发展极大地推动了通信电源的发展。高频小型化的开关电源及其技术已成为现代通信供电系统的主流。在通信领

域中,通常将整流器称为一次电源,而将直流-直流(DC-DC)变换器称为二次电源。一次电源的作用是将单相或三相交流电网

变换成标称值为48V的直流电源。当前在程控交换机用的一次电源中,传统的相控式稳压电源己被高频开关电源取代,高频开

关电源(也称为开关型整流器SMR)通过MOSFET或IGBT的高频工作,开关频率一般控制在50-100kHz范围内,实现高效率和小型

化。近几年,开关整流器的功率容量不断扩大,单机容量己从48V/12.5A、48V/20A扩大到48V/200A、48V/400A。


因通信设备中所用集成电路的种类繁多,其电源电压也各不相同,在通信供电系统中采用高功率密度的高频DC-DC隔离电源模

块,从中间母线电压(一般为48V直流)变换成所需的各种直流电压,这样可大大减小损耗、方便维护,且安装、增加非常方便


一般都可直接装在标准控制板上,对二次电源的要求是高功率密度。因通信容量的不断增加,通信电源容量也将不断增加。


IC695CRU3201Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU.  External high capacity battery IC693ACC302 required.  The CRU320 supports both Genius LAN and Ethernet LAN.  Dual Genius LAN is supported by an applicati


IC695CRU320CAConformal coated.  1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU.  External high capacity battery IC693ACC302 required.  The CRU320 will only work with RX3i ENIU remote I/O and Genius LAN.


IC695CRU320QPQuadPAC redundant controller.  1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base).  External high capacity battery IC693ACC302 required.


IC695DEM004Beta i Series 1-Axis Motion Demo Case for use with PACMotion or DSM324i motion controllers


IC695DEM006PMM Demo Case: RX3i and PACMotion


IC695DEM008Fieldbus Demo Case: RX3i and Fieldbus


IC695ETM001Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base


IC695ETM001CARX3i Ethernet Mdl,10/100Mbits,Conformal Coated.


IC695FTB001FIBER OPTIC TERMINAL BOARD FOR PMM335


IC695FTB1B032Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density box style screw terminal blocks


IC695FTB1B132Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density extended shroud box style screw terminal blocks


IC695FTB1S032Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density spring style terminal blocks


IC695FTB1S132Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density extended shroud spring style terminal blocks


IC695HSC304RX3i High Speed Counter, 4 channels.  8 configurable inputs and 7 configurable ESCP outputs.  Module supports high speed counting, input interrupts and programmable limit switch.


IC695HSC308RX3i High Speed Counter, 8 channels.  16 configurable inputs and 14 configurable ESCP outputs.  Module supports high speed counting, input interrupts and programmable limit switch.  Module requires PCI bus.  Requires terminal block IC694TBxx32.


IC695LRE001RX3i Local Expansion Module Occupies no system slots on base


IC695LRE001CARX3i Local Serial Expansion Conformal Coated.


IC695MDL664Smart Digital 24VDC Input module, 16 input channels in two groups of eight.  Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.


IC695MDL664CAConformal Coated.  Smart Digital 24VDC Input module, 16 input channels in two groups of eight.  Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.


IC695MDL765Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points.  Module does not ship with terminal block.  IC694TBB032 or IC694TBSx032 terminal block is required.


IC695MDL765CAConformal Coated.  Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points.  Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.


IC695NIU001RX3i NIU with two serial ports and 20K of local logic.  Module requires Universal base (IC695CHSxxx) and requires Ethernet module (IC695ETM001).NIU supports all RX3i I/O modules.


IC695NKT001RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).  ENIU supports two serial ports and 20k of local logic.  TheENIU must be installed in a IC695CHSxxx base.


IC695NKT001CARX3i Ethernet NIU Kit Conformal Coated includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).  ENIU supports two serial ports and 20k of local logic.  TheENIU must be installed in a IC695CHSxxx base.


IC695NKT002RX3i Ethernet NIU Kit with two Ethernet modules.


IC695NKT002CARX3i one NIU001 and two ETM001 Conformal


IC695PBM300RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus).  The mo dule supports PROFIBUS V1 Master functionality.


IC695PBM300CARX3i PROFIBUS Master, Conformal Coated, Module (must be installed on RX3i PCI bus).  The module supports PROFIBUS V1 Master functionality.


IC695PBS301RX3i Profibus Slave module supports V1 functionality.


IC695PMM335PACMotion 4-axis servo motion controller for RX3i


IC695PNC001Profinet Controller.  The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps.  Compatible with IC695CPU315, CPU320, CPE310 and CPE305 only a


IC695PNC001CAConformal Coated.  Profinet Controller.  The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, CPU320, CPE310


IC695PNS001RX3i Profinet Scanner Module


IC695PRS015Pressure Transducer module.  The serial port communicates with up to 15 Honeywell LG1237 Smart Pressure Transducer sensors.  Requires firmware/software 6.5 or higher.


IC695PSA040RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base.


IC695PSA040CARX3i AC Power Supply, 40 Watt Conformal Coated




感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

物流技术网 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.56js.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,物流技术网对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~