产品展示
SCZ30-4D伸缩臂吊装机
【简单介绍】
该车根据用户需求,在SCZ35-4型基础上,对工作臂、油缸及前后驱动桥、车架等均进行加强型设计,使用性能可靠。产品投放市场后,用户反映良好。
【详细说明】
SCZ30-4D伸缩臂吊装机
(escopic Crane Loader)
[ 产品简介 Product Introduction ]
SCZ30-4D型伸缩臂吊装机,底盘采用四轮驱动,刚性悬挂;液力机械传动,液压动力转向和液压制动,后轮转向。作业装置为两节四边形伸缩式工作臂和吊臂,于进集装箱石板材的吊装作业。
该车根据用户需求,在SCZ35-4型基础上,对工作臂、油缸及前后驱动桥、车架等均进行加强型设计,使用性能可靠。产品投放市场后,用户反映良好。
The escopic Crane Loader (SCZ30-4D) for almost any task that involves lifting, moving or placing objects or materials. It works with Four-Wheel Drive, hydromechanical transmission, hydraulic Power Steering, Hydraulic brake, and Rear-Wheel Steering. The handling equipment are escopic boom and Craner, it is expert to handle the stone-slab in container.
As the customers’request, we upgrade the design of SCZ35-4 with the working boom, cylinder and the shaft of drive etc. The quality is stable. It takes good reflection from the customers after marketing.
[ 主要技术参数 Specifications ]
额定起重量 Rated Load | 3000kg | |
载荷中心距(轮胎前沿距载荷中心) The Distance of Load Center(Tyre-fore to load center) | 3000mm | |
主钩zui大起升高度(主吊钩距地面) Max.Lifting Height of Main Hook(Main hook to ground) | 6350mm | |
主钩zui大外伸距(水平)(轮胎前沿距主吊钩) Max.Outspread of Main Hook(Horizontal)(Tyre-fore to main hook) | 2570mm | |
zui大行驶速度 Max.Traveling Speed | 30km/h | |
zui小离地间隙 Min.Ground Clearance | 350mm | |
zui小转弯半径 Min.turning Radius | 7250mm | |
爬坡度 Grade Ability | ≥30% | |
倾翻角度上/下 The Angle of Lean Up/Down | 15°/25° | |
轮距 Tread | 1900mm | |
轴距 Wheel base | 2520mm | |
自重 Deadweight | 8960kg | |
整机外形尺寸(长×宽×高)(不计属具高度) Overall Dimension (L×W×H)(Except the tool’s) | 5400mm×2280mm×2700mm | |
发动机(东风康明斯) Engine (Dongfeng Cummins) | 型号 Type | 4BT3.9-C80 |
额定功率 Rated power | 60kw | |
标定转速 Rated speed | 2000r/min | |
排量 Exhaust | 3.9L | |
轮胎 Tyre | 前轮 Front wheel | 16/70-24(14PR) |
后轮 Rear wheel | 10.00-20(14PR) |
注:由于技术改进,该数据可能与产品不符,如有误则以产品为准。
Note:The content and performance will be revised and the products will be improve without notice.